ADVERTISEMENT

Embroidery Thread Methods For Better Machine Embroidery Sewing

I’ve some suggestions so that you can get well outcomes with using your embroidery threads in machine embroidery sewing.

1. If you are going through thread breakage or have experienced completed designs bleeding on to your garments right after laundering, you happen to be likely even now employing rayon thread! The polyester embroidery threads are more powerful and more colorfast. Constantly clear away your embroidered clothes with the washer straight away, this may assist eliminate the bleeding. For that breakage, try lowering your tension, rayon threads are definitely the weakest from the embroidery threads.

I’ve been utilizing a commercial polyester thread, ARC embroidery thread for more than a 12 months now and obtaining fantastic success. In no way a break and it launders beautifully time soon after time. The embroidery remains to be lovely even once the garment is worn out. The arc thread at present has 288 colours!

ADVERTISEMENT

two. If you are experiencing a large build up on the again within your layouts, consider using the only pre wound bobbin that actually works problems free of charge within our machines. They are really precision wound with 132 yds per bobbin, of continual filament polyester, which operates with significantly less lint. Don’t just do they reduce the level of Develop up I haven’t got to wash out my device as often!

3. When you’ve given up on working with metallic thread as a result of breakage and other challenges which have been frequent to metallics, you have not experimented with the best however! In my view you will find only one metallic that I’ll commit my time making use of Mon Rex professional grade metallic thread. This is a correct forty wt. involves no special lubricants or in addition to usual pressure configurations. I do not use a Unique needle possibly! It comes in 21 beautiful shades on a thousand 1080 yd cones.

For the “other” manufacturers you might want to attempt the subsequent:

1. Normally feed metallic thread from the aspect in the cone/spool or it’ll kink.

2. Reduced the higher pressure.

3. Use a bigger eye needle or metallic needle.

4. Never use any lubricants in our equipment they can ruin our vehicle stress disks!